More Laminating Projects

 More Laminating Projects
Gift Card holder and Tags 

Hi Crafters

Following on from the other laminating projects mentioned in my previous post, I was asked if `tags could be made using the laminator.

So here are 2 styles of tags

The first has been made laminating a large tag and then adding a laminated pocket on the back to take your greeting 

Put a couple of large tags into a laminating pouch, and put through the machine

Cut around leaving a band around the tag sealing it.

Then with badge size laminating pouches, cut one down by removing 1.5cm from the long and short side, turn inside out and slip into another of the badge laminating pouches,pop through the machine

Cut the top off the badge and this gives you a clear pocket to add your card. add it to one of the tags 

Punch a hole in the top and add an eyelet to take your ribbon.

Here are 3 large Journal tags with one of my  cards on the back showing the pocket for journaling or gifting info.

Next are fun large tags made with 3D decoupage. It is a pad bought from the Range, the pad has papers, and coordinating 3D decoupage for toppers and cards. I laminated the individual pieces of 3D decoupage, fussy cut around the pieces and then layered them onto tags cut from the card with foam pads.

I love making these jazzy tags and they will brighten up any parcel. 

I have added an eyelet and ribbon, so these tags will be sturdy, and hopefully used more than once.

Happy Crafting

Dee